Product#: 63721LB

1963-72 Chevrolet/GMC Truck 1" Rear Aluminum Lowering Blocks

1963-72 Chevrolet/GMC truck blocks lower the rear of your coil spring truck up to 2" without affecting your ride quality. These block kits allow the vehicle's shock angle to remain unchanged from the factory position. Works...

Product#: 18988899

Ridetech Universal Weld-In Parallel Four Link; w/ Black Powder Coated Bars

Product#: LW20470

Universal; 28" Chrome; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...

Product#: 18987999

Ridetech Universal Weld-In Triangulated Four Link; w/ Black Powder Coated Bars

Product#: C222051

Competition Engineering Rear Coil-Over Shock Kit; Universal Design Allows Installation On A Variety Of Chassis.

Competition Engineering Rear Coil Over Shock Kit, Universal design allows installation on a variety of chassis. Complete kit includes 3 way Adjustable Shocks, Upper Mounts and Adjustable Lower Mounts. 3-Way Adjustable Shocks...

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...

Product#: AFK7387

1973-87 Chevrolet/GMC Truck Rear Axle Flip Kit

1973-87 Chevy and GMC truck rear axle flip kit allow you to lower the rear 6 inches. These kits included axle locators, mounting plates, U-bolts, and hardware.

Product#: 99108G

Flange Type Link Bushing; Black

Universal flange type link bushing - OD 1.25 in, ID.75 in, tube Length 1.31 in.

Product#: 17261

1959-70 Impala, Bel Air, Biscayne, Caprice; Trailing Arm Bushing; Each

Rear trailing arm bushing for various 1959-1970 GM full size models including Impala, Bel Air, Caprice, and Biscayne. This high quality reproduction bushing is engineered to replace the worn or deteriorated original,...

Product#: CF67001

1967-69 F-Body Camaro / Firebird Rear Shock Relocation Kit

Rear shock relocation kit for 1967-69 Camaros and Firebirds. This kit reconfigures the F-body rear shock absorbers from staggered to non staggered, providing additional tire and exhaust clearance and increased shock travel....

Product#: MN19405G

Black Polyurethane 3-1/4" Sway Bar End Link Set

It doesn't take long before soft suspension rubber begins to deteriorate. Polyurethane is impervious to deterioration caused by oil, grease, and the elements, giving you firm, confident handling that lasts. These bushings are...

Product#: CNK7387

1973-87 Chevrolet/GMC Truck Rear Frame C-Notch Set

Give your truck 3" of added rear suspension travel with a rear C-notch set. The C-notch set bolts into place and come with pre-formed frame boxing plates.

Product#: R132250

1973-87 Chevrolet and GMC Truck Coilover Single Adj Rear Suspension Ford 9" 250

With this all-new, engineered-from-scratch system, add modern performance to a pickup that was designed for utility all without removing the bed of the truck. QA1 engineered a unique design offering 4" to 7" drop that...

Product#: 5297QA

1965-68 Impala; Caprice; Bel Air; QA1 Upper Rear Adjustable Trailing Arm; 12-5/8" length; LH or RH

QA1's adjustable upper trailing arm for your 1965-68 Chevrolet B-Body solves the flexing issues common with stock arms. This arm offers adjustable mounts to provide significant tuning of your cars anti-squat, resulting in...

Product#: 33149R

1965-70 Impala / Full Size; With Single Upper Arm; Red Polyurethane; Rear Control Arm Bushing Set

Be in control when manuevering through turns, during standing start accelerations, braking or over bumps and berms. These bushings allow the rear end control arm system to function more effectively, adding a higher degree of...

Product#: H1314

1965-70 Impala / Full Size Lower Rear Trailing Arms

Eliminate wheel hop and improve traction with these Hotchkis lower trailing arms. Fabricated and tig welded from.120 wall rectangular tubing these arms feature greasable bushings, grade 8 hardware, and a powder coated finish....

Product#: 3775762

1960-63 Chevy Pickup 2 WD; 1963-74 Chevrolet Corvette; Strut Rod Bushing; 1.20"; Each

Reproduction strut rod bushing for 1963-74 Chevrolet Corvette models. This authentic replacement is manufactured using high quality automotive grade molded rubber and matches the original 1.20" diameter design for proper fit...

Product#: 154982

1967 Camaro; Traction Bar Installation Hardware Kit; Radius Rod, Rear Axle Housing; to Floor; 12-Piece Set

Reproduction of the 350, L-48 Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 12-piece hardware set mounts the radius rod to the rear axle housing and floor. The original style hardware...

Product#: UM2020B

1982-2002 GM F-Body - Umi Tubular Panhard Bar Kit (Non-Adjustable) - Black

High-performance tubular panhard bar is a direct bolt-in replacement for the weak, factory stamped panhard bar. A high-performance tubular panhard bar greatly increases rear stability, controls side movement and body flex; a...

Product#: 88L330

1979-98 Ford Mustang; Maximum Motorsports Panhard Bar; Standard / Natural Finish

Installing a panhard bar is one of the most dramatic changes that you can make to improve the stability of your 1979-98 Mustang. The panhard bar is a bolt-on solution to eliminate the lateral axel movement that causes the...

Product#: B9298

1959-64 Impala, Bel Air, Biscayne; Rear Upper Control/Torque Arm; Each

Reproduction of the original rear upper torque arm for use with 1959-64 Chevrolet Impala, Bel Air, and Biscayne models. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and...

Product#: 33149G

1965-70 Impala / Full Size; With Dual Upper Arm; Black Polyurethane; Rear Control Arm Bushing Set

Be in control when manuevering through turns, during standing start accelerations, braking or over bumps and berms. These bushings allow the rear end control arm system to function more effectively, adding a higher degree of...

Product#: MN8040G

1960-76 Mopar A / B / E-Body Black 1" Polyurethane Shackle Bushings With Heavy Duty Shackles Set

There are significant forces that are aimed at the rear leaf spring-type suspension pivot points and shackles. These wear out the stock rubber bushings in a very short period of time. The best solution for keeping your...

Product#: TTA6072

1960-72 Chevrolet/GMC Trucks Tubular Trailing Arms

These tubular trailing arms offer a clean look for your classic truck. Manufactured with a laser cut and formed spring platform fabricated to a CNC bent heavy wall 2" DOM tube body, these can be used to replace original worn...

Product#: CP708115N

1970-81 Chevrolet Camaro, Pontiac Firebird; Narrowed Drop Leaf Spring Kit; 1.5 in. Drop

This CPP Narrow leaf spring upgrade kit for classic Chevrolet Camaro and Pontiac Firebird. These kits allow for the absolute largest wheel and tire to be used without relocating the leaf springs front and rear hangers...

Product#: TRS6372K7

1963-72 Chevrolet and GMC Pickup Truck; Tubular Rear Suspension- 7" Drop

This tubular rear suspension set has what you need to upgrade your trailing arms and crossmember or convert to a tubular coil spring suspension for 1963-72 C10 trucks. The tubular trailing arms are made from heavy duty guage...

Product#: TF500178

1955-57 Chevrolet Rear End Conversion

The first complete rear end conversion kit! Allows for changing rear end to the more popular 10-12 Bolt or Ford 9". Kit includes: upper and lower shock mounts, axle seats, rear shock crossmember and u-bolts.

Product#: *A659520B

1959-64 Impala/Full Size Rear Tubular Trailing Arm Kit - Two Upper Trailing Arm - Black

Replace your worn out trailing arms with new CPP Totally Tubular™ arms. Original replacements come with rubber bushings. Totally Tubular™ arms are a stronger alternative to the factory arms and come with our...

Product#: R360

1967-69 Camaro, Firebird, 1968-79 Nova, GM X-Body; Rear Mono-Leaf Spring Installation Kit

Complete rear leaf spring installation kit engineered for 1967-1979 GM vehicles originally equipped with mono-leaf rear springs. This all-in-one solution includes correctly detailed shackles, high quality hardware, spring...

Product#: T70893

1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; LH Driver Side; EDP Coated

Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Also known as a trailing arm, this component mounts between the rear axle housing and the center crossmember to...

Product#: 525419

1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models

This reproduction rear axle pinion bumper is designed for various GM models and manufactured from high quality molded rubber with an integrated steel bracket formed in the correct OE configuration. Built to replicate the...

Product#: 33152G

1959-64 Impala / Full Size With 2 Upper Arms Black Polyurethane Rear Control Arm Bushing Set

Be in control when manuevering through turns, during standing start accelerations, braking or over bumps and berms. These bushings allow the rear end control arm system to function more effectively, adding a higher degree of...

Product#: B9297

1959-64 Impala, Bel Air, Biscayne; Rear Control Arm Bolt Set; wiith Integrated Shock Mounting Studs

Reproduction of the often damaged or rusted rear control arm bolt set designed to properly secure the lower shock absorber eyelet to the rear control arms. Each set includes two special bolts, nuts, and lock washers required...

Product#: 154081

1964-67 GM A-Body; Rear Control/Trailing Arms; Rear Upper; With Original Style Rubber Bushings; LH and RH

Reproduction rear upper trailing arms for 1964-67 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...

Product#: TR4730B

1980-96 Ford F-Series Truck, 1980-96 Bronco; Rear Axle Bumper

Reproduction rear axle bump stop for 1980-96 F-100, F-250, and F-350 as well as 1980-96 Bronco. This bumper is manufactured in durable rubber and replicates the original in fit and appearance. Rear axle bumpers are injected...

Product#: 42104DS

1964-67 Chevelle, GTO, Tempest, LeMans, Skylark, 442, Cutlass, F85; Detroit Speed Performance Rear Trailing Arm and Bushing Kit; Adjustable; Upper and Lower

Detroit Speed performance adjustable rear trailing arm and bushing kit for 1964-67 Chevrolet Chevelle, Pontiac GTO, Tempest, and LeMans, Buick Skylark, and Oldsmobile 442, Cutlass, and F85 models. This complete upper and...

Product#: A5500320B

1963-72 GM Truck; Double Adjustable Bent Trac Bar Kit

These trac bars are designed for lowered vehicles and will allow for the rear to be lowered and still keep proper alignment of the rear end. The adjustable units will adjust to the correct length to improve your vehicle's...

Product#: CX4838

1960-72 Chevrolet, GMC Truck; Rear Axle Control Arm Bushing; C10; 1/2 Ton; 2 wheel drive

Reproduction rear axle control arm bushing for 1960-72 Chevrolet and GMC 1/2 ton (C10), 2 wheel drive truck models. Each bushing is manufactured to original factory specifications and replicates the original in quality and...

Product#: T70892

1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; RH Passenger Side; EDP Coated

Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Also known as a trailing arm, this component mounts between the rear axle housing and the center crossmember to...

Product#: T70893W

1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; LH Driver Side; Silver Weld-Thru Coating

Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Commonly referred to as a trailing arm, this component mounts between the rear axle housing and the center...

Product#: CX4839

1960-72 Chevrolet, GMC Truck; Rear Axle Trac-Bar Bushing; Each

Reproduction rear axle trac-bar bushing for 1960-72 Chevrolet and GMC truck models. Each bushing is manufactured to factory specifications. Designed for the trac-bar that connects from the rear end housing to the frame. Sold...

Product#: *TF500164

1955-57 Chevrolet Polished/Plain Heidt'S Triangular 4-Link Coilover Rear Suspension Kit

Heidt's 1955-57 Chevrolet Triangulated 4-Link Coil-Over Suspension Kit is a very popular kit as it does not require a panhard rod and can handle some serious horse power. Bars are fully adjustable, 1-1/4" X.156 tube with 3/4"...

Product#: GW508

1968-70 Impala/Full-Size Chevrolet - Rear Anti-Squat Bracket

Making the car have better traction is what this is all about. The anti-squat bracket changes the geometry of the rear suspension by providing a different angle on the upper control arm. By changing this angle, the load...

Product#: 5295105

1967-69 Camaro/Firebird Torque Arm Rear Suspension

TCI Engineering's 1967-1969 Chevy Camaro Torque Arm assembly is engineered for Street, Autocross and Road Course Applications. The Torque Arm rear suspension was designed to eliminate the suspension bind that occurs when...

Product#: 17267

1965-76 Chevrolet Impala/Full Size; Rear Trailing Arm Bushings

These are reproductions of the rear trailing arm bushings used on all 1965-76 Chevrolet full size models. These bushings will replace your original worn out bushings and are manufactured like original for a perfect fit....

Product#: T6675120

1947-54 GM Truck TCI 4-Link Stage 2 Rear Suspension

Upgrade your old rear suspension with a brand new TCI 4-link rear suspension with coil-over shocks. With this set up you will get better ride quality and handling! Made in USA Includes: 1" unpainted steel upper link bars 1"...

Product#: K580011

1962-67 Chevy II / Nova G-Bar Rear Suspension With Coilover Shocks

The g-Bar rear suspension system dramatically improves ride quality and performance over the stock leaf-spring suspension. Four individual arms precisely position the rear axle, better defining the correct travel path. A...

Product#: 12087197

1964-70 Ford Mustang; Ridetech Bolt-On 4-Link Rear Suspension System; Double Adjustable Bars

Product#: R120200

1965-72 Ford F-100 Rear Single Adj Coilover 200lb Springs

QA1 engineered a unique torque arm design that maximizes performance without the inherent binding issues of other systems, all while achieving a 4" to 7" drop. This bolt-in system also offers unprecedented adjustability: the...

Product#: B9296

1959-64 Impala, Bel Air, Biscayne; Boxed Lower Rear Control Arms; Pair

These are upgraded reproduction versions of the lower rear control arms used on 1959-64 Chevrolet Impala, Bel Air, and Biscayne models. The arms are reinforced (boxed) for strength so they are great for vehicles equipped with...

Product#: 33148G

1965-70 Impala / Full Size With Single Upper Arm Black Polyurethane Rear Control Arm Bushing Set

Be in control when manuevering through turns, during standing start accelerations, braking or over bumps and berms. These bushings allow the rear end control arm system to function more effectively, adding a higher degree of...

Product#: D0417311

1964-70 Mustang; Detroit Speed; Quadralink Standard Shock

This is a great way to upgrade from original leaf spring suspension. Unlike our competitors, our exclusive 4-link geometry design is uncompromised to achieve the best possible handling. The Detroit Speed Swivel-Link (Patent...

Product#: 12117199

1967-70 Mercury Cougar; Ridetech Bolt-On 4-Link Rear Suspension System; Single Adjustable Bars

Product#: 041508DS

1962-74 Chevy II Nova, 1967-81 Camaro; Detroit Speed; Urethane Leaf Spring Shackle

Detroit Speed has updated the rear leaf spring shackle kits for 1967-1981 Camaro/Firebird and 1962-1974 Chevy II/Nova/Ventura/Omega/Apollo applications. These new shackles are less visible when standing behind the vehicle....

Product#: TBC97

1959-64 Impala Rear Upper Adjustable Control Arm ( 9 inch Ford Rear End)

Made in USA

Product#: LW21606

1962-79 X-Body/1967-69 F-Body; With Multi-Leaf; Black Traction Bars

These rugged traction bars are designed for multi-leaf spring suspensions and can be used for street or strip. Traction is greatly increased, wheel hop is eliminated, and the rubber snubbers provide a better ride. Adding...

Product#: 5201QA

1971-96 Impala; Caprice; GM B-Body; Lower Rear Trailing Arms; Adjustable; LH and RH

QA1's Adjustable lower trailing arms for your 1971-96 Impala or Caprice. Fit up to 28" wheels on your Caprice or Impala with bolt-on adjustable lower trailing arms. Get your wheel and tire package to fit with trailing arms...

Product#: 5586A

1960-73 Ford/Mercury; 8-Piece Rear Leaf Spring Anti-Squeak Pad Set; Various Models

Reproduction of the original leaf spring pad insulators that install between each of the rear leaf springs. These pads prevent metal to metal contact while reducing the noise made by the springs rubbing together. Set of 8....

Product#: B298

1967-80 Camaro, Nova, Firebird; Rear Leaf Spring Front Bushing; Various Models; OER

Reproduction rear leaf spring bushing for various 1967-80 GM passenger car models. A critical yet often overlooked component when restoring rear suspension performance, this bushing installs into the forward eye of the rear...

Product#: 14478

1967-69 Camaro / Firebird Caltracs Low Profile Traction Bars

Developed by Super Stock champion John Calvert, these traction bars are the answer to "hooking up" high horsepower with your leaf spring suspension car. This simple bolt-on kit requires no welding or alterations to the stock...