Product#: CX2035

1959-64 Impala, Bel Air, Biscayne; 1959-62 Corvette; Rear Strut Rod Bushing; for Panhard Bar or Rear Strut Rod; Each

Reproduction bushing for the rear panhard rod on 1959-64 Chevrolet Impala, Bel Air, Biscayne models, and for the rear strut rod on 1959-62 Corvette. If your full size Chevrolet or Corvette model is feeling loose around...


Product#: 88L330

1979-98 Ford Mustang; Maximum Motorsports Panhard Bar; Standard / Natural Finish

Installing a panhard bar is one of the most dramatic changes that you can make to improve the stability of your 1979-98 Mustang. The panhard bar is a bolt-on solution to eliminate the lateral axel movement that causes the...


Product#: GW504

1965-70 Impala / Full Size Adjustable Rear Panhard Bar And Bracket Set

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car,...


Product#: BX20165B

1982-02 F-Body BMR 2-Way Chrome-Moly Adjustable Panhard Rod w/Rod Ends, Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...


Product#: BX20164B

1982-02 Camaro / Firebird BMR Chrome Moly Adjustable Panhard Rod with Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...


Product#: H1501

1982-02 Camaro / Firebird Black Powdercoated Adjustable Panhard Rod

Get a grip! On the pavement, that is. Improve the handling and traction on your 3rd or 4th Generation F-body by upgrading the flimsy stock rear suspension. These rear adjustable panhard rods help you put the power to the...


Product#: BX20163A

1982-02 Camaro / Firebird BMR Chrome Moly Non-Adjustable Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...


Product#: BX20163B

1982-02 Camaro / Firebird BMR Chrome Moly Non-Adjustable Panhard Rod with Black Hammertone Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...


Product#: PHC4

1982-02 Camaro / Firebird Global West Adjustable Panhard Rod with Bearing and Rod End

The panhard rod control lateral placement of the rear end in the chassis. The stock panhard rod design can lead to a lateral location problem of the rear end based on too much deflection, making the car feel "loose" in the...


Product#: 88L072

2005-11 Ford Mustang; Double Adjustable Panhard Bar

Pro Series Chrome Moly Double Adjustable Pan Hard Bar for your 2005-2011 Mustang. This double adjustable bar features 4130 chrome moly tubing, dual heim joints and aluminum bushings for maximum adjustability and durability as...


Product#: HS900104

1955-59 GM Truck Weld-On Panhard Bar

The rear panhard rod is used to control lateral movement of the rear axle. It must be used when using a parallel 4-link suspension kit. Includes axle bracket, bar with stainless adjuster, urethane bushings, frame bracket and...


Product#: HS900106

1947-54 GM Truck Weld-On Panhard Bar

The rear panhard rod is used to control lateral movement of the rear axle. It must be used when using a parallel 4-link suspension kit. Includes axle bracket, bar with stainless adjuster, urethane bushings, frame bracket and...


Product#: HS900103A

1955-59 GM Truck Bolt-On Panhard Bar for Stock Housing

The rear panhard rod is used to control lateral movement of the rear axle. It must be used when using a parallel 4-link suspension kit. Includes axle bracket, bar with stainless adjuster, urethane bushings, frame brackets and...


Product#: BX20161A

1982-02 Camaro / Firebird BMR Adjustable DOM Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...


Product#: E5202

1982-02 Camaro / Firebird Non-Adjustable Tubular Panhard Rod

This tubular panhard rod resist unwanted flex and twisting to keep the axle located for improved cornering and drivability. The CNC-machined, MIG-welded rod features fluted, greasable, graphite/polyurethane bushings for long...


Product#: A5500321

65-72 GM Truck Double Adjustable Trac Bar

These trac bars are designed for lowered vehicles and will allow for the rear to be lowered and still keep proper alignment of the rear end. The adjustable units will adjust to the correct length to improve your vehicle's...


Product#: A5500319

1960-62 GM Truck Double Adjustable Black Trac Bar Kit

These trac bars are designed for lowered vehicles and will allow for the rear to be lowered and still keep proper alignment. The adjustable units will adjust to the correct length to improve your vehicle's handling ability...


Product#: BX20166B

1982-02 Camaro / Firebird BMR Panhard Rod Relocation Set with Black Hammertone Finish

This set replaces and relocates the panhard rod, allowing clearance for routing dual 3" exhaust over the axle. This tubular upper panhard rod support mounts in the OE location using existing mounting holes and lowers the...


Product#: G4658

93-97 Rear Axle Pan Hard Rod (With Performance Package)

Original GM rear axle panhard rod used to keep the rear end centered and aligned.


Product#: BX20160A

1982-02 Camaro / Firebird BMR Non-Adjustable DOM Panhard Rod with Red Powdercoat Finish

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are u-shaped and made of stamped steel and utilize soft, rubber bushings that allow deflection under load. Enhance...