Product#: K940

1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

Product#: 4721222

1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models

Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...

Product#: *8731909K

Weatherstrip Retaining Clip; Push-In Style; Head Diameter - 3/8"; Stem Diameter - 5/32"; Stem Length - 3/8"; Black Nylon; 10 Piece Set

Correct replacement weatherstrip push-in retaining clip used on various GM vehicles. Commonly used clip to retain the ends of door and roofrail seals, replacement style for door J-seals, door drain seals and other...

Product#: MA9874

1967-76 Dodge/Plymouth A-Body; Hood To Cowl Seal; With Clips

Reproduction of the original hood to cowl seal weatherstrip for use on 1967-76 Mopar A-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....

Product#: CX1493

1964-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Door Rubber Bumper Set, 4 Piece Set

OER® reproduction of the original door rubber bumpers designed for use on 1964-1986 C/K and 1987-91 R/V model Chevrolet and GMC pickup trucks. Each rubber stopper is designed to exact factory specifications for a perfect...

Product#: 22428N

1952-56 Customline, Fairlane, Victoria; Outside Door Handle Pads

Reproduction door handle pads for various 1952-56 Ford models including Customline, Mainline, Crestline and Fairlane. These pads prevent the the handles from scaring the paint. Replaces Ford part# BA-7222428-A.

Product#: MB184548

1969 Dodge Coronet; Quarter Extension Gaskets; Pair

This is the thin black plastic gasket that inserts between the rear quarter panel and the housing that surrounds part of the tail light. This extension acts as an anti-abrasion device to help prevent the quarter panel...

Product#: CX1372

1947-53 Chevrolet and GMC Pickup; Wiper Tower Gaskets; Pair

Wiper tower gaskets for 1947-53 pickup applications. Features and Benefits: Seals between the cowl panel and wiper tower base Helps reduce leakage and corrosion at the wiper transmission tower Additional Information: Sold as...

Product#: 153812

Weatherstrip Application Lubricant; 4 oz. Bottle; Makes Weatherstrip Installation Easier!

Precision's weatherstrip lube significantly reduces friction, thereby reducing the installation force required to assemble parts & fittings. Helps to avoid injuries related to slippage and repetitive stress, reduces rejects,...

Product#: CR1085M

1947-53 Chevrolet and GMC Truck; Cowl Vent Gasket; Molded Rubber

Reproduction molded rubber cowl vent gasket for early 1947-53 models. Features and Benefits: Replaces a worn or missing cowl vent gasket Molded rubber construction

Product#: MA9826

1967-72 Dart, Barracuda, Valiant, Scamp; Roof Rail Weatherstrip; 2 Door Hardtop; Pair

Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...

Product#: CX1487

1947-55 Chevrolet, GMC Truck; Cowl Top Vent Drain Hose

Reproduction of the original cowl vent drain hose designed for use with 1947-55 Chevrolet and GMC trucks. Each hose is designed to replace the original exactly. Chevrolet Applications: 1954-1955 Chevrolet Pickup Truck (1955...

Product#: MA2475

1967-1972 Dart, Barracuda, Valiant, Duster; Heater Box Seal Set; without Air Conditioning

Reproduction of the original style heater box seal kit designed for use with 1967-1972 Dodge and Plymouth A body models as listed. This heater box seal kit contains all the necessary seals required to replace old or rotted...

Product#: PW1039

1973-91 Chevrolet, GMC Pickup; Rear Window Weatherstrip Seal; without Trim Groove

Reproduction rear window weatherstrip seal for the large back window equipped 1973-86 C/K-Series and 1987-91 R/V-Series Chevrolet and GMC Pickup models. Manufactured from ozone resistant EPDM rubber, in the same OE specs as...

Product#: CX1442

1947-55 Chevrolet, GMC Panel, Suburban; Running Board to Body Seals; Pair

Reproduction of the original running board to body seals designed for use with 1947-55 Chevrolet and GMC pickup truck models. The seals are manufactured to original specifications and replace the originals exactly. Replace...

Product#: CX1506

1947-66 Chevy, GMC Truck; Inner Door Handle Gasket Set

Complete your restoration with this reproduction inner door lock gasket set for 1947-66 Chevrolet and GMC truck models. Designed to replicate the original components, these gaskets provide a proper seal between the door lock...

Product#: CX1167

1947-55 Chevrolet and GMC Truck; Outer Mirror Arm Gasket; LH or RH

Reproduction outer mirror arm gasket for 1947-55 models. Features and Benefits: Replaces the worn original gasket Helps seal the mirror arm mounting area Additional Information: Fits LH or RH side

Product#: *R81916

1981-91 Chevrolet/GMC Truck; Fender-to-Cowl Insulator Seal Set; LH and RH Sides

Reproduction of the fender-to-cowl insulator seal set, also called the cowl-to-fender sound seal set, that seals the area behind the rear portion of the front fender, in between the fender and the cowl on both sides of the...

Product#: MN1801

1970-76 Dart, Demon, Duster, Valiant; Body Plug Set; 22 Piece Set

Reproduction of the original style body plugs designed for use with 1970-76 Dodge Dart, Demon, Duster, and Valiant models. When doing a full restoration it is a good idea to replace all of body plugs under your vehicle. Plugs...

Product#: W9405

1981-91 Chevrole, GMC Truck; Hood to Cowl Seal Weatherstrip

Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...

Product#: W2194A

1963-64 Impala, GM Full-Size; Roof Rail Weatherstrip Seals, 4 Door Hardtop; RH and LH; Pair

Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line on various 1963-64 Impala, and GM full size 4 door hardtop models....

Product#: W2121

1963-64 GM Full-Size; Front Door Frame Weatherstrip; 4 Door Hardtop, Pair; Electra, LeSabre, Wildcat, DeVille, 98 Dynamic, Bonneville, Catalina, Star Chief

Reproduction of the original front door frame weatherstripping designed for use on 1963-64 GM Full Size 4 door hardtop models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M...

Product#: 6270662

1973-93 Chevrolet, GMC C/K, R/V Pickup; Cargo Lamp Mounting Pad Gasket

Reproduction cargo lamp mounting pad gasket for 1973-93 pickup models with cargo lamp mounted on the back of the cab above the rear window. Installs in between the housing and the truck cab to seal the elements out of the cab...

Product#: W21841

1963-1964 Impala, Electra, Wildcat; Windshield Glass Weatherstrip; 4 Door Hardtop; Various GM Full Size Models

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1963-64 GM Full Size models. This windshield seal is designed for use on 4 door hardtop models as listed. This gasket works with...

Product#: J1154

1947-54 Chevrolet and GMC Suburban and Panel Truck; Body Mount Pad Set; 8-Piece Set

Body mount pad set for 1947-54 Chevrolet and GMC Suburban and panel truck models. Features and Benefits: Replaces worn or missing body mount pads Helps restore the body mounting points Additional Information: Eight-piece set

Product#: W2081

1959-1960 GM Full Size Models; Windshield Glass Weatherstrip, 2 or 4 Door Sedan, Station Wagon

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1959-60 GM Full Size models. This windshield seal is designed for use on 2 or 4 door sedan models as listed. This gasket works with...

Product#: K40602

1962-67 Chevy II / Nova Fuel Filler Neck Gasket

Product#: CX1358

1947-55 Chevy, GMC Truck; Gas Neck Grommet

Reproduction of the original gas tank filler grommet designed for use with 1947-55 Chevrolet and GMC Panel trucks and Suburban models. Each grommet is designed and shaped to correct dimensions allowing a tight fit when...

Product#: CB234

1947-55 Chevrolet/GMC Truck; Seal; Cab to Running Board; Black Rubber

These seals drops down from under side of cab. Fills in the gap between the cab and running board. Sold as pair. NOTE: If you need the longer seal for a Suburban or panel truck check CB235. Made in USA

Product#: HE473

1947-53 Chevrolet Pickup; Chevrolet Hood Emblem Gasket

Reproduction of the original Chevrolet hood emblem gasket for use with 1947-53 Chevrolet truck models. Each gasket is die-cut to factory dimensions.This gasket inserts between the emblem and the hood. Protects the paint and...

Product#: SPD473

1947-53 Chevrolet, GMC Truck; Gauge Bezel to Glass Gaskets; Pair

Correct reproduction of the original gaskets that insert between the gauge bezel and glass. This reproduction is made to original specifications and will help seal the gauges when replacing the dash components. Sold in pairs.

Product#: MA820214

1967-72 Dodge, Plymouth A-Body; Firewall Gasket Set; without AC

Comprehensive firewall gasket set designed for use with all 1967-1972 Dodge, Plymouth A-Body models as listed. This set of gaskets are manufactured to correct factory dimensions offering an authentic replacement of the...

Product#: MB184580

1969-70 Dodge Charger; Tail Lamp Gasket Set; Inner and Outer; 4 Piece Set

Reproduction of the original style tail lamp gasket designed for use with 1969-70 Dodge Charger models. Each set includes the correct gaskets that replace the old or worn out originals for both RH and LH tail lamp lenses....

Product#: MN1798

1971-1974 Challenger, Barracuda, Cuda E-Body; Standard Body Plug Set

When doing a full restoration it is a very good idea to replace all of body plugs under your vehicle. Plugs are used to seal off bolts under your vehicle to prevent dirt from entering. Set contains the correct size and style...

Product#: MA820204

1970-71 Plymouth Duster; Exterior Paint Seal Gasket Set

Reproduction of the original style exterior paint gaskets designed for use with 1970-71 Plymouth Duster models. This comprehensive kit is designed to replace all the most important gaskets on the exterior of the vehicle....

Product#: MB281028

1962-74 Chrysler, Dodge, Plymouth; Splash Shield Clip Set; 25 Piece Set

Reproduction of the original style splash shield clips designed for use with all 1962-1974 Dodge and Plymouth models. These clips were used on various headlamp splash shields, inner fender splash shields and other splash...

Product#: R353A

1969 Camaro RS; Molded Rubber Paint Seal and Lens Gasket Set; with Rally Sport

" A complete set of original style molded paint seal and lens gaskets for 1969 Camaro models with the Rally Sport option. Sets include molded lens gaskets for the park lamps, tail lamps, back-up lamps and license lamp. Sets...

Product#: CB235

1947-55 Chevrolet/GMC Panel & Suburban Truck; Seal; Cab to Running Board; Black Rubber

These seals drops down from under side of cab. Fills in the gap between the cab and running board on the Panel and Suburban vehicles. Sold as pair. NOTE: If you need the shorter seal for a pickup trucks check CB234.

Product#: MB281022M

1968-69 Belvedere, GTX, Roadrunner, Satellite; Complete Splash Shield Set; with Manual Transmission

Reproduction of the original style splash shields designed for use with 1968-69 Plymouth Belvedere, GTX, Roadrunner, and Satellite models with manual transmission. Each shield is manufactured in.090 black masticated rubber...

Product#: 1667195

1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...

Product#: FL132

1947-Early 55 Chevrolet/GMC Truck; Battery Floor Hole Seal; Closed Cell Rubber

This rubber seal is attached to the battery box cover in floor. Stops air leaks and rattles. Made in USA

Product#: STAPLES

Staple For Inner Fender Splash Apron, 1/2 inch

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Product#: CX1081

1948-54 Chevrolet, GMC Truck; Park Brake Floor Seal Boot

Reproduction emergency brake or parking brake rubber boot for 1948-54 Chevrolet and GMC trucks. Manufactured in durable EPDM rubber compound replicating the original in quality, design, and fitment. Features correct mounting...

Product#: FP217

1947-Early 55 Chevrolet/GMC COE Truck; Seal; Cowl to Hood; Rubber

This rubber seal fits on the body cowl and touches the rear of hood. This is used only for the Cab-Over-Engine body (COE) and consists of two 21 lengths.

Product#: MB281007A

1967 Belvedere, GTX, Satellite Complete Splash Shield Set; with Automatic Transmission

Reproduction of the original style splash shields designed for use with 1967 Plymouth Belvedere, GTX, and Satellite models with automatic transmission. Each shield is manufactured in.090 black masticated rubber (same as OEM)....

Product#: W2059

1958 Impala / Full Size Door Handle Gasket Set - 6 Piece Set

Correct reproduction of the original door lock gasket set for use on 1958 Full Size and Impala models. Includes door handle gaskets and door lock gaskets. 6 piece set. One set required for 2 door models. Applications:...

Product#: MD2114

1960-76 Dodge/Plymouth; Rubber Body and Trunk Plug; 1-7/8"; Each

Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...

Product#: MB1173

1966-70 Dodge, Plymouth B-Body; Hood To Cowl Seal; with Hardware

Reproduction of the original hood to cowl seal weatherstrip for use on 1966-70 Mopar B-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....

Product#: CB136

1947-55 Chevrolet/GMC Truck; Retainer; Cab to Running Board Seal; 36" Long

These steel strips secures the rubber seal to the underside of the cab. Sold as each. 36 long. Note: On longer Suburbans and Panel trucks two strips are required for each side.Made in USA

Product#: FP119

1947-Early 55 Chevrolet/GMC Truck; Gasket & Seals; Front & Inner Fender; 8 PCS

Prevents metal to metal contact between inner and outer fenders and firewall filler plates. Sold as a set of 8 gaskets. Made in USA

Product#: J1011

1947-59 Chevrolet and GMC Pickup; Hood to Cowl Seal Hardware Set; 16-Piece Set

Reproduction hood to cowl seal hardware set for 1947-55 1st Series Chevrolet pickup truck models. Features and Benefits: Includes correct screws and mounts for hood to cowl seal installation Replaces missing or worn original...

Product#: HK235-CM

1964-93 Ford Mustang, Falcon, Fairlane, Torino, F100-F350, Bronco; Rubber Plug Set; 7/8" Diameter; Round; Pair

Reproduction rubber plug for 1964-93 Mustang and a variety of other Ford and Mercury models. Manufactured in quality EPDM rubber compound matching the original configuration for a perfect fit. Plug size 7/8". Sold as a pair....

Product#: CX1262

1938-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Welting; 25 Foot Roll

OER® reproduction of the original style front fender welting designed to seal the fender to the body on 1938-1972 Chevrolet and GMC truck models. This welting is essential when replacing fenders or restoring weatherstrips...

Product#: KW538

1955-72 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Rocker Drain Flaps; Pair; Various Models

Reproduction rear rocker panel flaps for various Buick, Chevrolet, Pontiac, and Oldsmobile models. Once installed, these flaps will help prevent road splash and debris from entering and blocking the rocker panel drain area....

Product#: WS502

1970-81 Camaro, Firebird; Door Frame Weatherstrip Seals; with Molded Ends; Pair

This reproduction door frame weatherstrip set installs on the outer frame of the door on 1970-1981 Camaro and Firebird models. Manufactured in the correct configuration for an easy, factory style installation, it is the...

Product#: WS508

1982-92 Camaro, Firebird; Roof Rail Weatherstrip, Coupe; with Molded Ends; Pair; OER

Reproduction of the original roof rail weatherstrip designed for use on 1982-92 Camaro and Firebird coupe models. These quality weatherstrips are manufactured to the correct factory configuration and seal the area between the...

Product#: 8731909

Weatherstrip Retaining Clip; Push-In Style; Head Diameter - 3/8"; Stem Diameter - 5/32"; Stem Length - 3/8"; Black Nylon

Correct replacement weatherstrip push-in retaining clip used on various GM vehicles. Commonly used clip to retain the ends of door and roofrail seals, replacement style for door J-seals, door drain seals and other...

Product#: 340999

1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks

Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...

Product#: 4414986K

1964-65 Chevelle, Cutlass, F85, Skylark; Roof Rail Weatherstrip Channel Set; 2 Door Hardtop; Stainless Steel; LH & RH; 6 Piece

Reproduction roof rail weatherstrip channel set for 1964-65 Chevrolet Chevelle, Oldsmobile Cutlass, F85, and Buick Skylark 2-door hardtop models. Manufactured to factory specifications, this 6-piece stainless steel set...

Product#: CX1438

1947-55 Chevy, GMC Pickup, Sedan Delivery; Front Fender Gasket Set; 7 Piece Set

OER® reproduction front fender gasket set for 1947-55 Chevrolet & GMC truck models. Each gasket set is designed to replace the front fender gaskets for both RH and LH sides. Always use new gaskets when replacing or...