Product#: 300310

1986-91 Camaro, Firebird; Deluxe Hatch Pull-Down Repair Set

Repair your rear hatch pull-down units. This set contains a new motor in an improved housing, nylon guides, gear nut, and white lithium grease. This repair set is for hatch pull-down units that have a metal frame.

Product#: 5717538

1961-64 Chevrolet; 1963-64 Oldsmobile; 1963-65 Buick; Full Size; Trunk Lid Hinge Arms; Hardtop, Sedan Models; RH & LH; Pair

Reproduction trunk lid hinge arms for 1961-64 Chevrolet, 1963-64 Oldsmobile, and 1963-65 Buick full size hardtop and sedan models (will not fit convertible models). These trunk lid hinge arms are manufactured to factory...

Product#: B10891

1/4-20 x 5/8 Hex Head SEMS Machine Screw,.750 Toothed Washer

Reproduction of the original 1/4-20 x 5/8 hex head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: TF400795

1955-57 Trunk Latch Assembly

Reproduction of the trunk latch for all 1955-57 models except wagons. Assembly includes 3 pieces, the latch, latch cover and lower striker plate. No hardware included.

Product#: MM1395

1962-74 Dodge, Plymouth; Trunk Lid Latch; without Power Release

Reproduction of the original trunk lock latch designed for use with various 1962-74 Dodge and Plymouth models. Each latch assembly is manufactured in stamped steel and features a new lock mechanism and latch. Includes a rust...

Product#: B9284

1961-64 Impala / Full Size Hardtop / Sedan Trunk Lid Torque Rods

Reproduction of the trunk hinge torsion springs used on all 1961-64 Chevrolet full size hardtop and sedan models. These torque rods are essential for keeping pressure on the hinge assemblies which keep the trunk lid open....

Product#: 4753019

1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Product#: TR1200B

Lokar Trunk Release Cable Set Black Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: MN1829

1963-74 Dodge, Plymouth A & B-Body; Trunk Lid Torque Rod Sliders; Pair

Reproduction of the original trunk torque rod sliders for use with Dodge and Plymouth A & B body models as listed below. Each slider is manufactured in quality injection molded ABS material for an authentic appearance and...

Product#: B16105

1968-72 Chevrolet Nova, 1971-72 Pontiac Ventura; Trunk Lid Hinge Assembly Set

Reproduction trunk hinge assembly set for 1968-72 Chevy II and Nova coupe or sedan models and 1971-72 Pontiac Ventura models. These high quality reproductions are manufactured in stamped steel to exact factory specifications...

Product#: 152928

1964-70 Chevelle, Nova, 1962-70 Impala, GM Full Size; Trunk Latch Striker/Catch; Black EDP Coated; Replaces GM# 7771161

Reproduction of the original trunk latch striker for use with all 1966-70 Chevy II/Nova, and 1962-70 Impala, Bel Air, Biscayne, and Caprice models. Each striker is manufactured in quality stamped steel to factory...

Product#: 16604428

1982-92 Camaro / Firebird Coupe Gas-Charged Liftgate Support Strut; Yellow; Reproduction

Reproduction gas-charged liftgate support strut for models with rear window wiper, rear defogger, rear spoiler and rear window shade. This is the heavy-duty gas strut designed for the heaviest of rear decklids. Features a...

Product#: 43252C

1964-65 Ford Falcon/1964-66 Ford Mustang; Coupe/Convertible; Trunk Lid Catch

Reproduction of the original trunk lid catch bracket for 1964-65 Falcon and 1964-66 Mustang coupe or convertible models. Simple bolt-in installation makes it easy to replace your worn or bent trunk lid catch with a quality...

Product#: TF401069

1955-57 Chevy Hardtop/Sedan Trunk Lid Striker

Reproduction trunk lid striker for all 1955-57 hardtop and sedan models. This piece attaches to the rear trunk floor striker bracket and features zinc plating for rust prevention.

Product#: TR1200

Lokar Trunk Release Cable Set Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: CHT1300

Lokar Hood/Trunk Release Cable Set Stainless Steel

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood...

Product#: 153852

1970-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lock Striker; Various Models

Reproduction of the original trunk lid catch for various 1970-81 GM models including 1970-81 Camaro and Firebird models. Manufactured in stamped steel to the original configuration and features correct mounting points and...

Product#: B9287

1961-65 GM Full size; Trunk Lid Hinges; Hardtop, Sedan Models; RH and LH; Pair

Reproduction of the original rear trunk lid hinges for use with 1961-65 GM Full Size hardtop and sedan models (will not fit wagon or convertible models). The trunk lid hinges are manufactured to correct factory dimensions...

Product#: 43504J

1962-63 Falcon Trunk Lock Ornament Assembly

Reproduction die-cast and stamped steel trunk lock ornament assembly with injection molded plastic trunk lock ornament insert for 1962-63 Falcon models. Each trunk lock ornament assembly included the die-cast ornament with...

Product#: TF400662

1955-57 Chevrolet Hardtop/Convertible Trunk Lid Torsion Rods

Reproduction trunk hinge torsion springs for 1955-57 Chevrolet hardtop and convertible models. These torque rods are essential for keeping pressure on the hinge assemblies which will help keep the trunk lid open.

Product#: 20291279

1971-81 Buick, Chevy, Pontiac, Olds;,Rear Trunk Latch Lock Assembly; Various GM Models

Reproduction of the original trunk latch assembly designed for use on various GM models including 1971-81 Camaro and Firebird. This reproduction features a black electrophoretically deposited coating (EDP, or E-coat) for...

Product#: 152600W

1962-64 Impala, Full Size Hardtop, Sedan; Trunk Lid Hinges Complete; LH & RH; Weld-Thru Primer Finish

Reproduction trunk lid hinges for 1961-64 Chevrolet Impala, Bel Air, and Biscayne hardtop and sedan models. These complete hinges include the arms and the housings and are manufactured in quality stamped steel to factory...

Product#: 15187

1966-67 Chevy II, Nova; Trunk Hinge Torsion Rods; Pair

Torque rods are essential for keeping your truck stable in the open position. The torque rods apply pressure to the hinge to allow the trunk lid to remain open. These replacement torque rods feature the proper tension...

Product#: 44890B

1964-66 Ford Mustang; Coupe/Convertible; Trunk Lid Hinge Torsion Rods; Pair

Reproduction of the original trunk torsion rods designed for use on 1964-66 Mustang models. Each torsion rod is manufactured to factory dimensions featuring correct bends for an authentic replacement. Designed to connect the...

Product#: 44890A

1965-66 Ford Mustang; Fastback; Trunk Torsion Rod

Reproduction trunk torsion rod for 1965-66 Mustang Fastback models. The rod acts like a spring keeping constant tension on the trunk lid when it is open. Sold individually. 1 required per vehicle.

Product#: TF400389

1955-57 Chevrolet Bel Air, 150, 210; Trunk Lid Hinges; Sedan; EDP Coated

Reproduction of the original trunk lid hinges designed for use with 1955-57 Chevrolet Bel Air, 150, 210 sedan models. Each hinge is manufactured in quality stamped steel replicating the original GM hinge in design and...

Product#: CB45501

1965-70 Charger, Coronet; Billet Hinge Kit; Steel Trunk Lid; Natural

Designed for use as a direct replacement, these trunk hinges require no alterations for vehicle installation. The gas-charged springs are specifically calibrated for steel lids to provide a smooth and effortless action...

Product#: VF42700BS

1935-36 Ford Coupe, Cabriolet, Roadster; Trunk Lid Hinges; Stainless

Cast in exact original form with enlarged allen-head hinge bolt for long life and super easy removal or installation of trunk lid. Polished stainless steel and steel base. Pair.

Product#: 20614880

1986-91 Chevrolet Camaro; 1998-02 Pontiac Firebird; Hatch Pull Down Motor Reversing Switch

If your Hatch Motor has quit working, the stock/worn out Reversing Switch is generally the cause. The Reversing Switch is found inside of the Hatch Pull Down Unit mounted to the Latch assembly. It is designed to provide power...

Product#: TF401401

1955-57 Bel Air, 210, 150, 1958-61 Impala, Bel Air, Biscayne; Trunk Lid To Hinge Bolt and Washer Set; 12 Piece

Reproduction trunk lid mounting bolt set for various 1955-61 Chevrolet full size passenger car models. This high quality bolt set features the correct size original style fasteners with a silver zinc finish. Rest assured you...

Product#: 153592

1982-1992 Camaro, Firebird; Rear Hatch Hinges; Billet Aluminum; with Hardware; Black; Pair

Billet reproduction of the original style rear hatch hinges for 1982-92 Camaro and Firebird models. Finally, an answer to those bent rear hatch hinges that cause your hatch to sag all the way to the back of the car. These...

Product#: BH30016C

1963-64 Impala / Full Size With Steel Lid Polished Finish Billet Aluminum Trunk Hinges

Set your ride apart with these high-quality billet aluminum trunk hinges from Eddie Motorsports. CNC-machined from solid aluminum for a vast improvement to the look of your trunk compartment. Nitrogen filled gas shocks and...

Product#: 1049

1967-69 Camaro, Firebird; Trunk Lid Hinges; RH & LH; Pair; EDP Coated

Reproduction of the original trunk lid hinges for 1967-69 Camaro and Firebird coupe or convertible models. Correct reproduction of original attaches to trunk lid and upper rear body panel allowing the trunk lid to open and...

Product#: G4077

1991-02 Camaro / Firebird, 1991-96 Impala / Caprice Trunk Lid Release Solenoid

If your classic was originally equipped with a trunk switch and it is no longer working, it could be the solenoid is bad. If so, this is a relatively quick and inexpensive fix. This original GM solenoid mounts on the side of...

Product#: G4621

1993-02 Camaro / Firebird Trunk Lid Latch

Original GM trunk lid/liftgate latch designed for use on 1993-2002 4th generation models.

Product#: MM1839

1970-74 Dodge Challenger; Trunk Lid Hinges; EDP Coated; Pair

Reproduction of the original trunk lid hinges designed for use with 1970-74 Dodge Challenger models. Each hinge assembly is manufactured to original factory specifications and replaces the old or damaged original exactly....

Product#: 153580

1959-72 Buick, Chevy Pontiac, Oldsmobile; Trunk Latch Mounting Bolt Set; Various Models

Reproduction of the original 1/4-20 x 5/8 Hex Head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...

Product#: 7678550

1968-70 Chevy II, Nova; Trunk Latch Striker Anchor; EDP Coated

Reproduction of the original trunk latch striker anchor designed for use with 1968-70 Chevrolet Nova models. This anchor is welded to the center of the rear body panel inside the trunk and the latch striker is then bolted on....

Product#: BH30016B

1963-64 Impala / Full Size With Steel Lid Machined Finish Billet Aluminum Trunk Hinges

Set your ride apart with these high-quality billet aluminum trunk hinges from Eddie Motorsports. CNC-machined from solid aluminum for a vast improvement to the look of your trunk compartment. Nitrogen filled gas shocks and...

Product#: TF400696

1955-57 Bel Air Convertible Trunk Lid Hinges

Reproduction trunk lid hinge assemblies for 1955-57 Bel Air convertible models. These hinge assemblies are manufactured to original specifications and are finished in a rust preventive coating*.

Product#: TF4003

1955-57 Bel Air, 150, 210, Nomad; Trunk Alignment Pin

CNC machined stainless trunk alignment pin. Made from billet stainless. Stronger than the stamped sheet metal designs. Each pin is polished to show qualit finish.

Product#: TF4004

1955-57 Bel Air, 150, 210; Trunk Striker

CNC machined stainless trunk striker. Made from billet stainless. The ones on the market are stamped from sheet metal. Thes are much stronger and look beautiful.

Product#: VF43511B

1941-48 Ford Deluxe, Super Deluxe; Trunk Handle & Base

Works of art?no details overlooked, they're "Drake Quality". Every component perfectly matches the factory-original. Ready to install with stainless key cover and keys. Handle, base, glass lens, lens gaskets, lens mounting...

Product#: 23187-BBLP

1968-75 Chevrolet Corvette; Convertible Deck Latch Assembly; RH

Convertible Deck Latch Assembly RH for 1968-1975 Chevrolet Corvette. From restoration to performance, we are proud to offer the highest quality parts for both classic and late models Corvettes.

Product#: 43200A

1964-66 Mustang, 1962-65 Fairlane, 1964-65 Falcon, 1965-67 Comet; Trunk Latch Assembly; Except Station Wagon

Reproduction of the original trunk latch assembly designed used on various 1962-67 Ford models. Each latch is manufactured in high quality stamped steel and easily installs onto your Mustangs trunk same as original. Correct...

Product#: 9868540

1970-81 Camaro, Firebird; Trunk Hinge Torque Rod; with Rear Spoiler; RH Passenger Side

Reproduction of the original rear spoiler trunk hinge torque rod designed for use on 1970-81 Camaros with rear spoilers. This torque rod is essential for keeping pressure on the trunk hinge assembly which will maintain the...

Product#: CL2040

1958-79 Trunk Lock Handle Shaft (4-5/8" Straight Shaft)

Correct replacement of the trunk lock cylinder to latch torque rod. This rod extends from the outer trunk lock cylinder to the inner latch assembly and allows the lock to engage when the key is turned. Applications 1967-77...

Product#: 20309167A

1982-92 Camaro, Firebird; Rear Window Hinge Bolt with Nut; CNC Aluminum; Flat Black; Set of 4

Custom CNC machined rear window hinge bolt and retaining nut set for 1982-92 Camaro and Firebird models with rear lift-up window. The hex stud bolt is manufactured in 7075 billet aluminum for strength and durability. Stud and...

Product#: 1400001

1967-69 Camaro/Firebird; 1959-72 Impala; 1962-74 Nova; 1964-72 Chevelle; and Other GM; Remote Power Trunk Release System

The Klassic Keyless system is a complete do-it-yourself kit designed specifically to fit your vehicle. In this power trunk release kit you will receive: 1 power trunk latch, 1 manual push button, wire and wire loom, full...

Product#: KW693

1967-69 Camaro, Firebird; Trunk Lid Torque Rods; with Spoiler; RH & LH; Pair

Correct reproduction trunk lid torque tension rods for 1967-69 Camaro and Firebird models equipped with a rear spoiler. Each rod is manufactured to precise factory specifications and features the correct contours and...

Product#: 9868539

1970-81 Camaro, Firebird; Trunk Hinge Torque Rod; with or w/o Rear Spoiler; LH Driver Side

Reproduction of the original rear spoiler trunk hinge torque rod designed for use on 1970-81 Camaros with rear spoilers. This torque rod is essential for keeping pressure on the trunk hinge assembly which will maintain the...

Product#: 20309167B

1982-92 Camaro, Firebird; Rear Window Hinge Bolt with Nut; Steel; Gloss Black; Set of 4

Reproduction steel rear window hinge bolt and retaining nut for 1982-92 Camaro and Firebird models with rear lift-up window. The hex stud bolt is manufactured in steel with a plastic cap as original. Stud and nut are...

Product#: 88947684

1987-92 Camaro / 1989-92 Firebird Convertible; Liftgate, Trunk Strut; Deck Lid Lift Support

Reproduction gas-charged liftgate/trunk lid support strut for 1987-92 Camaro convertible, 1989 Firebird convertible, or 1991-92 Firebird convertible models. Manufactured to factory specifications featuring the correct OE...

Product#: 20309167

1982-92 Camaro, Firebird; Rear Window Hinge Bolt with Nut; Steel; Gloss Black; Each

Reproduction steel rear window hinge bolt and retaining nut for 1982-92 Camaro and Firebird models with rear lift-up window. The hex stud bolt is manufactured in steel with a plastic cap as original. Stud and nut are...

Product#: 154954

1982-92 Camaro / Firebird Coupe Gas-Charged Liftgate Support Strut; Yellow; Reproduction

Reproduction gas-charged liftgate support strut for models with rear window wiper, rear defogger, rear spoiler and rear window shade. This is the heavy-duty gas strut designed for the heaviest of rear decklids. Features a...

Product#: 152600A

1961-64 Impala, Bel Air, Biscayne; Hardtop, Sedan; Trunk Lid Hinges Complete; LH & RH; Pair; EDP Finish

Reproduction trunk lid hinges for 1961-64 Chevrolet Impala, Bel Air, and Biscayne hardtop and sedan models. These complete hinges include the arms and the housings and are manufactured in quality stamped steel to factory...

Product#: 153789

1970-81 Camaro, Firebird; Trunk Lid Hinge Assembly; LH Driver Side

Torque rods and mounting hardware sold separately

Product#: 10193275

1993-02 Camaro/Firebird Convertible Trunk Lid Strut - RH/LH; Reproduction

Reproduction liftgate/trunk lift support strut for 1993-02 models. Manufactured to factory specifications featuring the correct supporting pressure and original style mounting points. Sold individually. Fits left or right...

Product#: 153790

1970-81 Camaro, Firebird; Trunk Lid Hinge Assembly; RH Passenger Side

Torque rods and mounting hardware sold separately

Product#: 10419988

1993-2002 Camaro; Liftgate Trunk Lid Support Strut; Reproduction

Reproduction liftgate/trunk gas-charged lift support strut for 1993-02 Camaro coupe. Manufactured to factory specifications featuring the correct supporting pressure and original style mounting points. Sold individually. Fits...