Product#: 609833A

1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Bright Finish

Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with bright finish face finish, two generic logo keys, cylinder...

Product#: GN110663

1955-87 GM Car and Truck; Door Lock Pawl; Half Moon Style; Fits Short D-Shaped Shaft

Door lock pawl retainer for various 1955-64 GM passenger car and 1967-91 GM truck models. Mounts at the end of lock cylinder firmly holding the pawl/lever in place. Fits the short shaft D-shaped lock cylinders. LH or RH.

Product#: TK109

1962-86 GM Car, Truck; Door Lock and Key Set; Pre-Coded; with 1969-86 Style Round GM Logo Keys

Complete door locks and keys for many 1962-86 GM vehicles. When it comes to replacing the door locks, this kit makes it easy. Each set provides 2 pre-coded lock cylinders, 2 pre-cut GM logo keys, lock retainers and gaskets....

Product#: 22020256

1977-93 GM; Door Lock & Tailgate Actuator; without Bracket; Front & Rear Door; Fits LH or RH Side; Each

Reproduction of the original door lock actuator assembly for use with a variety of 1977-93 GM vehicles as listed. This actuator will install on both RH or LH doors. Will replace burned out originals and give years of lasting...

Product#: TK135

1962-94 GM; Door and Trunk Lock Set; with Pre-Coded Late Style Key

Complete set designed to replace your door and trunk lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and trunk cylinders. Includes door lock retainers, gaskets and...

Product#: CL1103

1970-78 Camaro with Long Cylinder Door Lock Pawl; LH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned.

Product#: CL1102

1970-78 Camaro with Long Cylinder Door Lock Pawl; RH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned.

Product#: K4013

1969-2002 Nylon Rod Clip, Fits 5/32" Rod Diameter; 1/4" Hole Size; LH Driver Side; Varius Models

Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...

Product#: CL1100

1967-78 Door Lock Pawl; RH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. Applications: 1967-69 Camaro models 1970-78 Camaro models with short lock cyli nders...

Product#: 7762203

1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each

This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...

Product#: A20675

Nylon Rod Clip, Fits 5/32" Rod Diameter, RH, 1/4" Hole Size

Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...

Product#: TF400424

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Door Lock Rods; 2 & 4 Door, Sedan; Pair

Reproduction of the original inner door lock rods designed for use with 1955-57 Chevrolet Bel Air, 150, 210, Nomad 2 door, sedan models. Each rod is manufactured to correct factory specifications. The rods runs from the door...

Product#: MD2130

1966-76 Mopar A-Body / B-Body Non-Illuminated Door Lock Set with Replacement Keys

Replace your old worn door locks with a reproduction coded door lock set, complete with 2 coded lock cylinders, 2 original shaped non-OEM keys, lock pawls and retaining brackets. Applications: A-Body 1966-69 Barracuda 1966-76...

Product#: G6881

1962-96 GM; Door Inside Locking Rod Clip; Various Models; Each

This authentic lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...

Product#: CL1114

1965-66 Full Size Chevrolet 2 Door Hardtop LH/RH Door Lock Pawl

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. Models with flat pawls. Fits LH or RH side of the vehicle.

Product#: 609833

1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Black

Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with black face finish, two generic logo keys, cylinder retainers,...

Product#: CL1128

1962-67 Chevy II / Nova Door Lock Pawl RH

Reproduction of the original lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned.

Product#: PY1554CK3

1965 Mustang GT; 1966 Mustang (All); Complete Lock Set; Ignition; Door; Trunk and Glove Box (Long Button); With Replacement Keys; One Key Fits All

Reproduction complete lock set for 1965 Mustang GT and 1966 Mustang (all models). Manufactured to factory specifications, this comprehensive lock set is designed to restore proper function and original appearance to all...

Product#: 22050K

1952-67 Ford; Various Models; Door Lock Cylinders; With Keys

Reproduction of the original door lock cylinders designed to replace the old or worn our lock cylinders on the various Ford models listed below. Each lock cylinder includes a key that is pre-coded making installation easy!...

Product#: 312316

1988-94 Chevrolet, GMC Truck and SUV; Door Lock Cylinders; with 2 Keys

Each pair of cylinders include 2 pre-cut keys for easy and fast installation.

Product#: TK1018

1971-87 Chevrolet, Buick; Door Lock Set; Bright Finish; With Pre-Coded GM Logo Keys; RH and LH Doors

Reproduction of the original style door locks, hardware, and pre-coded keys for use with various 1971-87 General Motor models. This complete set designed to replace your door lock assemblies. Each set is produced with...

Product#: TF401165

1955-57 Chevy Bel Air, 150, 210, Nomad; Rear Door Lock Assembly; 4 Door; Sedan; RH Passenger Side

Reproduction of the rear door lock assembly for 1955-57 Chevrolet Bel Air, 150, 210, 4 door sedan models. Includes correct replacement hardware to replace the old or worn out original components. This set includes everything...

Product#: MD2649

1970-71 Mopar A-Body / B-Body Ignition / Door / Trunk Lock Set With Pentastar Keys

This complete lock set is designed to replace your ignition, door, and trunk lock assemblies. Each set comes complete with coded locks with Pentastar keys, pawls, clips and gaskets. Note: Not for fiber-optic, tilt &...

Product#: CL1101

1967-78 Door Lock Pawl; LH

Reproduction lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. Applications: 1967-69 Camaro models 1970-78 Camaro models with short lock cyli nders...

Product#: 14910

1973-87 Chevrolet/GMC Truck Door Lock Pawl; LH

Reproduction door lock pawl for 1973-87 Chevrolet and GMC models. This pawl mount to the back of the door lock and actuate the latch. Fits Left Hand (Driver) Side.

Product#: 152638

1970-81 Camaro, Firebird; Inner Door Lock Rod Set

Reproduction of the original inner door lock knob rod and bellcrank rod designed for use with 1970-81 Camaro and Firebird models. These two rods are manufactured in stamped steel to original specifications featuring correct...

Product#: TK441

1986-92 Camaro Door and Trunk Lock Set with with Late Style Key

Complete set designed to replace your door and trunk lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and trunk cylinders. Includes door lock retainers and gaskets.

Product#: GN110671

1968-91 GM Door / Trunk Key Blank "D" Code (Late Style Key)

Un-cut replacement key for the indicated code listed for 1968-91 GM models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct letter...

Product#: MD2648

1966-68 Mopar A-Body / B-Body Ignition / Door / Trunk Lock Set With Pentastar Keys

This complete lock set is designed to replace your ignition, door, and trunk lock assemblies. Each set comes complete with coded locks with Pentastar keys, pawls, clips and gaskets. Note: Not for fiber-optic, tilt &...

Product#: PY007

1962-65 Dodge; Plymouth; Chrysler; A/B/C-Body; Door Lock Cylinders; w/ Replacement Style Keys; LH and RH

Replace your worn door locks with a coded door lock set complete with 2 coded lock cylinders and 2 original shaped non-OE replacement style keys.

Product#: LG2042

Billet Door Lock Knobs 10-24 Thread, 3 Band Style, Machined Finish

LG Billet USA 3 Band Billet Door Lock Knobs with a universal fit for multiple vehicle platforms with a 10-24 thread and are 2-1/4? tall. Made from 6061-T6 Billet Aluminum. These door lock knobs have been engineered and...

Product#: CX1296

1947-51 Chevrolet, GMC Truck; Outer Door Lock Cylinder; RH or LH; Each

Reproduction of the original door lock cylinder assembly designed for use with 1947-51 Chevrolet and GMC truck models. Each door lock cylinder set includes a pre-coded cylinder with two keys. The 1947-51 models only included...

Product#: CX1285

1967-72 Chevrolet, GMC Truck; Door Lock Pawl; RH Passenger Side

Reproduction door pawl to replace the damage or missing original on 1967-72 Chevrolet and GMC truck models. Each door lock pawl is manufactured in quality stamped steel replicating the original for an authentic appearance and...

Product#: TF401163

1955-57 Chevrolet Bel Air, 150, 210; Rear Outer Door Handle To Latch Rods; 4 Door Sedan

Reproduction of the original rear outer door handle to latch rods designed for use with 1955-57 Chevrolet Bel Air, 150, 210, 4 door sedan models. Each rod is manufactured in stamped steel to correct factory configuration and...

Product#: TF401164

1955-57 Chevy Bel Air, 150, 210, Nomad; Rear Door Lock Assembly; 4 Door; Sedan; LH Drivers Side

Reproduction of the rear door lock assembly for 1955-57 Chevrolet Bel Air, 150, 210, 4 door sedan models. Includes correct replacement hardware to replace the old or worn out original components. This set includes everything...

Product#: MN2727

1973-74 Barracuda, Cuda, Challenger; Door Latch Lock Clips

Keep your door working properly by replacing the door latch/lock clips with these new clips. Each set includes 14 color coded clips to fit 1973-74 E-Body applications.

Product#: 14194

1947-51 Chevy, GMC Pickup, Panel Trucks; Door Lock Cylinder Clip; Each

OER® Authorized reproduction of the original door lock clip for 1947-51 Chevrolet and GMC truck models. This reproduction clip attaches the door lock cylinder to the inside of the door. Sold individually.

Product#: TK424

1961-62 Full Size Chevy Ignition, Door (Long Cyl), Glove & Trunk Lock Set With Original Style Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 long door lock cylinders 1 glove box cylinder 1 tr unk lock cylinder 2 pre-cut...

Product#: CX1284

1967-72 Chevrolet, GMC Truck; Door Lock Pawl; LH Driver Side

Reproduction door pawl designed to replace the damage or missing original on 1967-72 Chevrolet and GMC truck models. Each door lock pawl is manufactured in quality stamped steel replicating the original for an authentic...

Product#: TK426

1963 Full Size Chevrolet Ignition, Door (Long Cyl - 2"), Glove & Trunk Lock Set With Original Style Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 long door lock cylinders (2" long) 1 glove box cylinder 1 trunk lock cylinder 2...

Product#: MD2667

1960-76 Mopar Door / Trunk Lock Retainer Clip

Replacement door and trunk lock cylinder retainer clip. Available for most 1960-76 models.

Product#: 22023B

1967-73; Mustang and Cougar; Door Lock and Trunk Lock Retainer

Individually packaged. This is the retaining clip that holds the lock cylinder in place, inside each door. One required per door lock on 1967-68 Mustang and Cougar models. It is also used on the trunk lock on 1967-73 Mustang...

Product#: MD2674

1970-74 Dodge, Plymouth E-Body; Door Lock Set, Non-Illuminated, With Original Style Keys

Replace your worn door locks with a coded door lock set complete with 2 coded lock cylinders, 2 OEM keys, lock pawls and retaining brackets. Applications: 1970-74 Barracuda 1970-74 'Cuda 1970-74 Challenger Note:Must use...

Product#: TK448

1986-92 Camaro; Door, Trunk, Rear Floor Compartment, Rear Stowage; Lock Set; Black Face; With Keys

Reproduction lock set for 1986-92 Chevrolet Camaro models. Manufactured to factory specifications, this complete lock set is designed to restore proper function and appearance to multiple locking points on the vehicle. The...

Product#: MD2100

1960-74 Dodge, Plymouth; Door Lock Cylinder Gasket; A, B & E-Body; Each

Reproduction door lock cylinder gasket for virtually all 1960-74 Mopar A, B and E-Body models. Each gasket is manufactured in quality nylon material to factory specifications. Replacing the door gasket is always a wise choice...

Product#: PY1554CK1

1964-65 Mustang; Complete Lock Set; Ignition; Door; Trunk and Glove Box (Short Button); With Replacement Keys; One Key Fits All

Reproduction complete lock set for 1964-65 Ford Mustang models. Manufactured to factory specifications, this comprehensive lock set is designed to restore proper function and original appearance to all primary factory locking...

Product#: VF2302B

1942-48 Ford; Door Lock Cylinder & Keys

Flipper has raised teardrop notch. Each comes with 2 keys. Covers in stainless steel. (We can key multiple cylinders to match.) Each.

Product#: CL1127

1962-67 Chevy II / Nova Door Lock Pawl LH

Reproduction of the original lever that mounts at the end of the door lock cylinder allowing the door latch assembly to be activated when the key is turned.

Product#: TK275

1961-64 Chevrolet Impala / Full-size - Ignition/Door/Trunk Lock Set With Original Style Key

Lock set designed to replace your ignition, door and trunk lock assemblies. Each set is supplied with "coded" cylinders and 2 pre-cut keys which will fit the new door, ignition and trunk lock cylinders. Note:Set i s for...

Product#: TK179

1955, 1957 Glove Box Trunk And Door Lock Set

This compreshensive lock set for 1955 and 1957 full size Chevrolet models includes the glove box, door, and trunk lock cylinders all configured to a single, hex-head style key.

Product#: TK205

1955, 1957 Ignition/Door Locks With Original Style Keys/"U" Pawls

Complete set to replace ignition and door locks on 1955 and 1957 Chevrolet models. Includes two original style pre-coded keys, "U" type pawls and gaskets.

Product#: B92591

1959-64 Impala; Bel Air; Biscayne; Door Lock to Latch Rods; Includes Retainers; LH and RH

Reproduction door lock to door latch rods for various 1959-64 GM full size passenger car models. This is the rod that connects the door lock pawl the door latch assembly to be activated when the key is turned. Includes LH and...

Product#: TK247

1956 Glove Box Trunk And Door Lock Set

This compreshensive lock set for 1956 full size Chevrolet models includes the glove box, door, and trunk lock cylinders all configured to a single, original pear-head style key.

Product#: A1013

Door Lock Rod Clip

Replacement style clip for many different GM models including Camaro. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: TK137

1970-73 Camaro - Door and Trunk Lock Set - with 3/4" Long Shaft

Complete set designed to replace your door and trunk lock assemblies. Each set is produced with "coded" cylinders and 2 pre-cut keys which will fit the new door and trunk cylinders. Includes door lock retainers and gaskets.

Product#: K940

1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

Product#: 330485

1973-91 Chevrolet, GMC Truck, Blazer, Jimmy, Suburban; Door Lock Knob Ferrule; Each

Restore the finishing detail of your interior with this quality OER reproduction door lock knob ferrule for 1973-91 Chevrolet and GMC truck, Blazer, Jimmy, and Suburban models. Manufactured to exact factory dimensions, each...

Product#: TK822

1981-89 GM; Door Lock Set with GM Logo on Keys; Black

Reproduction door lock cylinders for various 1981-89 GM models. Includes a pair of cylinders with black face finish, two OE-style GM logo'd keys, cylinder retainers, and gaskets. Fitment Note Correct Black Finish for Various...

Product#: 9728247

1962-91 Buick, Chevy, GMC, Pontiac, Oldsmobile; Door Lock Cylinder Retainer; Each; Various Car & Truck Models

Reproduction of the original type lock cylinder retainer required on various 1962-91 GM models. If you're replacing your lock cylinder, it will probably be necessary to replace the cylinder retainer. Manufactured in spring...

Product#: MN2116

1970-76 Mopar Stainless Steel Door Lock Strikers

Replacement door lock strikers for various 1970-76 Mopar models. Manufactured to function and fit like the original, but manufactured in bright stainless steel. Applications 1970-76 A-Body 2 door models 1970-74 B-Body 2 door...